Product Reviews

Product Reviews

Stud finders can detect the wall in multiple locations in one fell swoop, and instantaneously illuminate display elements in front of the device. Fetanten TS005 Stud Finder Review presents a model designed to work faster for instant detection of hazards lurking beneath walls with less error-prone and scalpel-precision readings.

Fetanten TS005 Stud Finder Review

They make combing through the exact location of support parts like studs and joist a lead-pipe cinch. Stealthy and live electrical wiring can expose you to severe injuries or electrocution, and also leaves wires severed.

The finder integrates four distinct scanning modes for circuits, AC, woods, metals and deeply buried objects. Its AC detection mode renders pinpoint-precision with a range of +/-1%.

Fetanten TS005 Stud Finder Review | 5 Major Features

1. 4-IN-1: Multi-Scanner Edge-Finding

The Fetanten TS005 Stud Finder multi-scanner edge-finding stud-sensor detector with LCD zeroes in edges or centers of metal, rebar behind walls, wood, joist, wooden beams, floors, and ceilings as well as subsisting live AC wire.

If you do not want to sail close to the wind when knocking through walls or ceilings embedding live electrical wiring, tool up with the TS005. It scans surfaces for wiring lights, outlets or switching by drilling and hammering into walls as you can locate hazards and disconnect power.

TS005 can identify the smaller profile of electricity lattice with high precision AC detection. Multi-mode detection lets you peer beneath walls without muddling through a pitfall.

2. Depth of Drywall

For dry walls, the TS005 pinpoints studs instantly and accurately. Fetanten TS005 pins down the edgings and center of wooden beam and joist in drywall deeply ensconced up to 1.2”. Metal mode finds parts like the pipe, nail, aluminum, rebar, and copper situated particularly deep up to a maximum of 1.57”.

Tweak to the DEEP mode to find wood or metal parts nestled at a depth of up to 1.77”. 85~240 volt AC homes in voltage or live electrical lines located particularly up to 2.36”.

You get the ball rolling and hone in the exact location of live electrical wiring by screening a wall, or other tangible surfaces for metallic parts inside like a pipe for a gas network or rebar obscured in a concrete block.

3. Graphical LCD & Continuous Sounds

The inbuilt graphical display boasts arrows that adjust location and shape to accurately indicate the existence of detected objects as you probe with the finder. With triple buttons on the front, the TS005 makes its use a piece of cake right out of the box.

It gives audiovisual cues indicating the location of a target, the display screen, and audible alert beeps or noise fire off if you bypass a stud.

You can mark the site of the edges of a stud with clockwork accuracy rather than second-guess the location. Easy-read graphical LCD and unremitting BI-BI-BI sounds tell again on the stud’s exact location. Auto-power-off cuts it out if goes inactive for 60 seconds.

4. Intuitive Operability

STEP 1: Turn on the detector, and select your preferred scan mode

STEP 2: Stick the finder flat on a wall, then press and cling to the “PUSH” button at the edge, and hold the unit still for a full calibration (1-to-2 seconds). At the end of calibration, the tool will make a short beep and clear display bars in a single stroke.

STEP 3: While still gripping the “PUSH” button, locate the device on the target surface for scanning to detect stud edges, AC wire, metal parts, pipes and much more.

STEP 4: When the detector senses an object, it will beep nonstop, and a peck shape pops up on the LCD screen.

5. Unlimited Home Renovation & Decoration Applications

The 4-in-1 TS005 multi-scanner stud sensor renders a multipurpose and hands-on tool ideal for home renovation and decoration. For home decoration, it’s useful for drilling, jewelry fixing, and painting to avoid Livewire when drilling directly.

The soft and ergonomic grip allows you to probe over a surface for a stud, just inscribe a mark at the stud’s initial and ending point.

It pins down edges and center of wall studs, metal pipes, rebar beneath walls, ceilings or floors, wooden beam, wood studs, joist and “live” AC wire. It’s a well-oiled hand tool that brings down-to-earth value in the smallest packages during home renovations or bedecking.

Check The Latest Price on Amazon, Now!

Why should you use Fetanten TS005 Stud Finder?

1. Multi-Scanner Stud

Fetanten TS005 homes in AC Livewire, metal, wooden beam, and examines the depth of a wall for density fluctuations.

It comes with all bells and whistles with the ability to spot the edgings of a stud, deep scan, precise AC probe, and extra scanning modes. Detect live electrical wiring hidden in the wall and steer clear of danger or range in their exact location.

2. Convenient Auto-Actions

The TS005 comes with a button tone and low battery indicator for more convenience. Its auto-off deactivates the device if it stays without running for 60 seconds. The features preserve battery life and make it easier to maintain.

3. Different Modes

The TS005 has a STUD mode to scan wood, joist in drywall up to 2”. The metal mode identifies metal pipes, rebar, nail, aluminum, or copper up to 1.57” deep. The DEEP mode probes to a depth of 1.77” and AC setting for AC Livewire propel it to the catbird’s seat in the niche.

4. Easy-To-Use

Equipped with three buttons, the TS005 offers highly precise operations. The push buttons allow you to select your desired probe and audible warnings hark back to a stud’s location. Graphical LCDs render clockwork accuracy.

5. Handy and Versatile

The handheld detector helps you locate the framing studs buried in walls. Most homeowners do not have a drafting plan that allows identifiable studs in a home. It works with wooden beams, metal and other thick-seam objects found in walls with live wire sensors.

  • Equipped with four modes, viz. metal, AC live wire, DEEP and stud
  • Comes with a low battery indicator and auto-off that activates every 60 seconds of dormancy
  • Graphical LCD and beeping signal for added versatility
  • Intuitive and easy-press buttons for seamless operation
  • Superior scanning technology for ultra-accurate depth of drywall readings
  • 85~240 volt AC for voltage or live electrical lines with a +-1% accuracy range
  • Sound beeps remind you of a stud’s location
  • Ideal stud sensor for home renovations and decorations
  • It doesn’t work on lath, direct current or plaster walls
  • Detection depth fluctuations due to wall humidity, corrosion or conditions that shroud a probe

FAQ – Frequently Asked Questions

  1. Do you get a battery with the device?

No, the battery (1x9V) battery is not included.

  1. Will it sense copper shafts beneath floorboards?

Yes, but you have to take into account the depth range.

  1. Will it probe accurately and efficiently on plastered walls?

It’s not up to snuff for plastered walls as indicated by the manufacturer.

  1. Can it detect AC electric lattice in the wall?

Yes, you should scan horizontally or vice versa.

  1. It detects studs, metal, or AC, but what does “DEEP” Mode mean?

DEEP type means a Deep scan mode with scalpel-like precision on hard-to-reach targets like metal or wooden beams.

Final Verdict

With a minimalist design and comprehensive detection, Fetanten TS005 Stud Finder Review gives credence to the multi-scanner for decorative construction and renovations. You can grease the skids to pinpoint metal studs, current beneath walls, floors or ceilings, beams and the existence of live AC wires.

It scans deeply up to 2.36” for AC with an accuracy rating of +-1%. BI-BI-BI sounds keep reminding you where a stud lies to steer clear of electrical accidents. Clandestine live electrical wiring in the walls and ceilings can unleash danger in dreadful packages.

Fetanten ensures the coast is clear as it homes in the smallest profile of installation. You can’t play a narrow squeak by going tool-less, a stud finder nips all troubles in the bud.

Product Reviews

Renovate your toolbox with a multi-functional hands tool to home onto studs and clandestine targets. Studs, joists, and AC live wiring will become a search for a needle in the haystack if you go DIY and tool-less. Black & Decker BDL190S Review relates to a cutting-edge invention from a manufacturer who went to great pains to build a better mousetrap.

Black & Decker BDL190S Review

It merges two tools in one-an auto-leveling laser level and a stud finder for more versatility and convenience. Equipped with the BDL190S, you draw targets like a moth to a flame-including wood or metal studs and live A/C wiring.

Black & Decker BDL190S Review | 5 Major Features

1. Stud Detection

The BDL190S arms you with a stud sensor to comb through surfaces to detect wood or metal studs and live AC wires. The electrical field locator can detect studs through up to ¾” thick drywall. Push the button and hold it. LCD will light, and detector runs the initialization process.

The READY icon will pop up on the LCD screen, and the unit will sound once to alert a complete calibration and ready for scanning. If it hits a stud, a “STUD FOUND” message illuminates onscreen.

Probe with a snail’s pace and keep sliding until EDGE message appears and beep sounds. You can pin down the center of the stud which lies between marks.

2. Patented Auto-Leveling Technology

BDL190S cuts the mustard if you want to mount a new shelf or portrait. It comes with BullsEye auto-leveling laser that levels automatically without variations and projects a horizontal laser curve. It’s impeccable for test and measurement levels alone.

The built-in laser level auto-aligns for 5 seconds with flexibility and handiness. You can project the laser beam to a length of 20 feet; it levels automatically for ultra-accurate BullsEye readings.

The auto-leveling laser levels make hanging pictures and mounting decorative items a piece of cake. And it punches in with impressive laser levels viz. leveling accuracy: ±1/8 inch (3 mm) @ 10 feet (3 m) and auto Leveling range: ±4.5°.


Test on an existing “live” AC wiring before every use. It scans and ranges in “live” AC wiring up to 1-1/2” from the surface. The sensor pins down AC voltage and cherry-picks only live wires. AC voltage scanner works in high gear as you prod for studs.

It comes in handy if the sensor lies proximately to live AC wiring or detector button becomes depressed. If it identifies AC voltage, the LED (C) will light. Avoid calibration near live AC as it diminishes the device’s sensitivity. Ensure you turn off the unit when probing proximate electrical wires and pipes to avoid accidents.

4. Simple Operability

Black & Decker BDL190S detecting components for wood or metal studs or AC wiring nestled in the lower portion of the unit help you comb through surfaces. To detect studs, hold it straight up and down placing it flat on the surface.

Press in and keep the ON/OFF button, the LCD screen and audible sounds help you home onto the target’s center by sandwiching it between marks.

The laser unit renders readings for walls only while it produces level lines when placed against a vertical plane. It’s equipped with a pendulum-lock to halt oscillation if you switch off the laser. Inbuilt AC Detection remains active as you trace studs.

5. Hands-Free Operation of Laser

You can mount on other surfaces other than drywall. For these surfaces, the keyhole dangling cone works with a standard nail or screw in a pre-drilled hole.

To use the keyhole dangling cone, put it on a nail and screw with the narrow part of the opening projected upwards. Press the laser onto the slinging cone until it falls into place. To detach the laser, lift it a bit and pull it straight off.

It will also do the job with the slinging cone attached to the rear and then hang the tool on the nail and screw. Ensure its straight and nestled tightly on the cone and keep it secure on the wall.

Check The Latest Price on Amazon, Now!

Why should you use Black & Decker BDL190S?

1. Auto-Leveling Laser

Addition of an inbuilt laser level helps you hang a portrait or a new shelf on a wall. You will not need additional measurements or readings, the inbuilt laser level auto-aligns after every 5 seconds. With a laser length measuring 20 feet, you can operate laser lines and hang on drywall surfaces.

2. LCD Screen

The Black & Decker BDL190S comes with an intelligent and easy-to-read LCD that gives scan readings.LED (C) represents AC WIRE SENSING, READY message and EDGE icon on the LCD screen, as well as beeps sounds, help the user to home in targets with improved precision.

3. Battery

The selling point of the BDL190S derives from its battery-powered assembly. It’s convenient as it does not impose branded battery or energy sources that nickel-and-dime you to death. You can wing it with batteries for your remote control.

4. Straightforward Stud Detection

Grasp the hand with your thumb on one edge and your fingers on the other side. Move it at a snail’s pace when scanning and hold it straight up and down, corresponding to the studs the and it will give you midpoint marks.

5. Hands-Free Operation of Laser

To hang the appliance on a wall, detach the orange protective cap from the drywall pin and keep it on the cone. Push pin into drywall, keep it straight and nestled firmly. It allows you to mount on drywall surfaces in a super-easy method.

  • Dime-a-dozen 2AA batteries with low battery indicator on LCD screen
  • STUD DETECTION pokes through up to ¾” thick drywall
  • AC WIRE SENSING zeroes in “live” AC UP TO 1-1/2”, identifies live wires and AC voltage
  • Auto-leveling laser lines to mount objects against
  • Intelligent and intuitive LCD
  • Soft and ergonomic grip with an ultra-durable, high-impact resistant case
  • Two-in-one technology bands together a laser level and stud locator
  • Cannot detect studs on materials with inconsistent density such as carpet, padding, wallpaper with metal foils or fibers and freshly painted surfaces

FAQ – Frequently Asked Questions

  1. My Black & Decker BDL190S keeps finding too many studs in the search area, how do I troubleshoot?

It detects other objects; studs lie 16 inches or 24 inches apart with 1-1/2” width.

  1. The Laser does not project on the wall?

Use it against vertical walls only. Lines bend on slanted walls and other non-vertical surfaces.

  1. Does the unit come with a case?

Yes, it includes a sturdy, durable case.

  1. Can the device put out right vertical lines if turned 90 degrees?

It will only work horizontally; vertical slants do not render a sharp line.

  1. Can you use it to mount a drop ceiling?

If you have the skills, it should work due to its perfect light.

Final Verdict

Pinning down studs beneath walls or mounting pictures make a fine kettle of fish. Black & Decker BDL190S Review two-in-one unit accomplishes it at the drop of a hat.

BullsEye auto-leveling interior line laser and stud sensor combination tool makes it ideal for hanging pictures, pinpointing wood or metal studs, homing onto live AC wires, and installing decorative objects.

On vertical flat surfaces, the auto-leveling laser evens out automatically without adjustments and illuminates horizontal laser lines. It comes with a precision-functioning LCD that manifests stud finding data, low battery level and readings for precise probing.

To keep everything aboveboard, it packages AC wire indicator LED, Wall Attachment keyhole, wall attachment drywall pin, self-leveling laser lines, and cover.

Product Reviews

STANLEY takes the catbird’s seat as a global maker of hand tools, power appliances, and related accessories. Unveiled in 1843, STANLEY clawed its way to the top at the peak of the industrial revolution arming technicians and other experts with innovative, sturdy, and hands-on tools.

Stanley FatMax Stud Sensor 300 Review

The FatMax Stud Sensor 300 Review sheds light on a unit that uses electronic signals to pinpoint the center of studs, joists and live AC wiring through drywall or other typical building materials.

Once it homes in the center of the stud in one pass along the surface, it illuminates and beeps an audible bleep. You can tweak the METAL SCAN, AC TRACKING, Depth Detection or STUD mode for a pinpoint-accuracy.

Stanley FatMax Stud Sensor 300 Review | 5 Major Features

1. Multi-Scanning Tool

You can detect wood or metal studs nestled up to 3” of a wall. Select the METAL SCAN Mode, AC TRACKING Mode, Depth Detection Mode, and STUD Mode for more precise results. To detect wood or metal studs, hold it against the surface firmly to probe to a depth of 1-1/2 “through drywall.

The METAL SCAN Mode penetrates up to 3” through drywall. The One-Pass center-find technology has an accuracy range of +-1/8” for wood and ¼” for metal in ranging in the stud’s center. The “live” wire red LED illuminates and projects an icon on the LCD screen with an audible alert when in the proximity of electrical wiring.

2. Modern LCD Display Screen

Stanley FatMax 300 LCD helps you draw a bead on targets and have them cornered in their exact locations. The screen shows you once the self-calibration completes, low battery and the stud location graphic. Replace with a new 9V battery if the “Low Battery” alert pops up on the LCD.

When you detect a stud’s center, the “Center” icon will surface on the screen, and an audible tone beeps. The unit indicates once a calibration completes and a “Ready” indicator will come into sight on the LCD. It runs at full tilt with sequential LEDs, and audible beeps show reading and backlit LCD screen prevents downtimes in low-light conditions.

3. Auto-Calibrating Unit

The unit comes with factory-set high-sensitivity strength for stud detection. Detection powered with automatic calibration allows straightforward and precise detection in multi-mode scanning. The ability to self-calibrate renders fast and ultra-accurate results.

For clockwork-accuracy from the Stanley S300, glide it over the first stud after detection. The unit will produce a sound and the sensitivity will automatically self-adjust to the most excellent level for the surface or stud materials discovered in the first pass.

It improves the accuracy of the readings for the stud center and edge detection. Automatic calibration helps in detecting studs accurately with the audibly-supported signal probe. The finder self-calibrates once you start detecting with a sound and continues until you return to the stud’s location.

4. Simple Operability

To detect wood or metal studs, place the unit flat against the wall, making firm contact. Push in and hold the activation button, a sequence of tones will sound. When the unit completes calibration, the “Ready” bar pops up on the LCD. Hold on the activation button, if all segments of the LCD flash ON and OFF, move it to a different site and probe again.

Slide the unit across the plane in a straight line. As it detects a stud, the unit will show the relative location of the stud on the screen. It illuminates a “Center” icon on the LCD with audible beeps. Use the marking channel well-situated atop to mark the stud’s center for improved accuracy.

5. Applications & Wall Surfaces

STANLEY fashioned a hand tool for a variety of applications-including overhead lighting, paneling, kitchen installation, bathroom installation, shelving, cabinets, and interior decorating. It will render best results interior surface probing.

Doors and windows feature extra studs and headers for improved stability. The Stanley S300 senses the edge of the double studs and solid headers as a single, broad stud. The Stud Sensor 300 will scan through conventional building materials, viz. gypsum drywall, plywood sheathing, hardwood floors, Linoleum over wood, and wallpaper.

The sensor cannot browse through carpeting, foil-faced materials, ceramic tile, cement or concrete, metal and plaster walls. It does not exhibit any difference when screening surfaces lined with wallpaper or fabric.

Check The Latest Price on Amazon, Now!

Why should you use Stanley FatMax Stud Sensor 300?

1. Audiovisual Alerts

A chain of LEDs and audible sounds indicate reading for stud center, auto-calibration, and Livewire warnings. LED-powered marking channel pinpoints target and makes highlighting surfaces a piece of cake and pinpoint-accurate.

2. Depth Range 

It scans wood or metal studs up to a depth of 1-1/2” and live AC wires up to 2”. The META SCAN mode probes up to 3”. Depress the AC/METAL button once and its projected on the LCD as Metal Scan.

3. Automatic Sensitivity Selection

The unit beeps and the detection will automatically self-adjust to the best level for the surface and stud materials identified during the first pass. It helps you range in the stud center and edge with scalpel-like precision.

4. Detects Live AC wiring

The “live” wire red LED will illuminate, the “AC” icon will pop up on the LCD, and the unit will beep when in its proximity. The AC TRACKING Mode senses live wire and illuminate the relative intensity of its location.

5. Multi-Scanner

The Stanley FatMax Stud Sensor 300 provides a multi-target screening for metal and wood studs, AC and Scan modes for highly accurate readings. You can pinpoint ferrous or non-ferrous metals like copper with the deep metal mode penetrating up to 3”. It will do the job with one pass center technology to home in stud midpoints.

  • Sequential LEDs and marking channel locates target for accurate and hassle-free readings
  • Audible beeps and auto-calibration for smooth operation
  • Backlit LCD keeps the sensor’s functionality in low light conditions at full pelt
  • Live AC detection up to 2” deep and metal scanning up to 1-1/2” beneath the material’s surface
  • Soft ergonomic grip and durable, break-resistant construction
  • Deep metal mode detects metal through up to 3” of surface
  • Single-pass center-finding technology to pinpoint stud midpoints with accuracy
  • Auto-calibration helps user to re-scan and identify an omitted stud
  • The thickness, density or moisture composition of the wall’s seam will affect detection strength

FAQ – Frequently Asked Questions

  1. Does the Stanley FatMax Stud Sensor 300 work when adequately calibrated?

Calibrate in line with the manufacturer’s instructions for better precision.

  1. Does it come with a battery?

No, the 9-volt battery is not included.

  1. What surfaces will it perform poorly or render no results at all?

Avoid carpet, foil-faced, ceramic or plaster walls.

  1. Does it have an operating temperature as I live in the cold north?

Yes, +32°F to +120°F (-0°C to +49°C).

  1. Do static electrical charges in the drywall sprawl out across the detection range?

Static electrical charges develop on most surfaces and spread the voltage detection area. Scan holding the appliance 1/2 “away from the wall or put your other hand on the surface roughly 12” from the sensor.

Final Verdict

Stanley FatMax Stud Sensor 300 Review puts forward a safe and pinpoint-accurate technique to identify studs and live AC wiring in the rear. Without a stud and AC wire sensor, you have a lick of work to home onto targets which may turn out as baleful as death.

Rather than risk a brush with death from electrocution, stud sensors make the danger-fraught task a breeze and riskless. LCD backlit LCD pinpoints the center of a stud, AC “live” wiring and recalibrates if you bypass a target. Once you locate the center of a stud, joist and live AC wiring, a visual display and audible sounds aid in scanning.,/div>

Product Reviews

To mount objects from drywall, you need a pinpoint-accurate sensor for studs and potentially dangerous live wires. You can uncover studs tool-free, but for safety and precaution, arming yourself with a finder will go a long way to prevent accidents.

Zircon StudSensor i65 Review

Zircon StudSensor i65 Review puts forward proprietary SpotLite Pointing System virtually punches through all thick walls and extra seams. Without the appliance, you tread on icy ground or risk damaging wires.

Go Zircon to quickly and easily pinpoint the edgings and center of wood or metal studs and joists buried in walls, floors, and ceilings. No close shave, an intelligent LCD, WireWarning and audio tone allow you to trace studs with military precision.

Zircon StudSensor i65 Review | 5 Major Features

1. Edge & Center-Finding

Stud Scan mode pinpoints the edges or center of wood and metal up to 1 ½” beneath a surface. The Zircon StudSensor senses both the center and edge of wood or metal studs and joists in ceilings, floors or walls in one stroke.

Patented CenterVision technology pinpoints the center of a stud in a single pass.  It boasts a hard-wearing high-impact case and the proprietary SpotLite Pointing System illuminates the center of a stud with scalpel-like precision. The tool may identify other objects beneath the wall like pipes or conduit.

DeepScan mode for every nook and cranny doubles the screening depth to 1 1/2” (38 mm). The high-sensitivity mode offers a fit to kill scan that indicates the center of an extremely deep stud illuminated with four middle bars.


Zircon’s WireWarning detections functions continuously. Once you detect live AC voltage, the WIREWARNING indicator pops up in the display. When scanning starts over a live AC wiring, the WIREWARNING icon flashes continuously.

WIREWARNING detection spots the existence of live, unsheathed electrical wire up to 2” (51 mm) deep. ACT (Auto Correcting Technology) works to tentatively recalibrate the tool. It’s a transparent recalibration with no indication. When the arrow indicator illuminates, the device got calibrated near and over a stud and then dislocated.

The arrow sheds light to the direction of the omitted stud. After completing a calibration, the SpotLite Pointing System and buzzer instantly activate and the LCD displays nonstop measurements.

3. Intuitive Operability & Instructional DVD

Place the stud finder flat against the wall and press the POWER button, a beep confirms the completion of a calibration before moving it further.

The EDGE icon illuminates to indicate the site of a stud edge. When you hit the center of a stud, the four middle symbols, CENTER indicator, and SpotLite Pointing System will all illuminate, and the buzzer beeps.

If you run into deeper studs or thicker walls with their center spotted, only two bars display on the Signal Strength Indicator and SpotLite beam and four middle icons will illuminate. When it comes across a stud, it generates an audible sound and pops up a red arrow onto its center spot.

4. LCD Display & Audible Alerts

The LCD Display projects direction, edgings and center of studs. LCD DISPLAY alerts you when you inch closer to the edge or center of a stud. It also informs you when a re-calibration suffices. Spotlight visual cues manifested as a glowing arrow helps you pinpoint the location of wooden or metal studs.

If you flash across a surface and all LCD segments switch on simultaneously with continuous beeps, use the high-sensitivity mode due to an overly dense surface or unit not flat against the wall. It also produces audible alerts; the sensor will ping once you run into the center of studs.

5. Marking Channel & Superior Accuracy

Once you range in a stud or edge of an object, mark the site where the SpotLite Pointing System illuminates. Highlighting the center of a stud improves accuracy of labeling readings. The ergonomic design and soft grip offers comfort and unfettered maneuverability of the tool as you scan.

Trademarked CenterVision technology trots out Zircon’s latest leap since it unveiled its first stud finder in 1982. Make one pass for a pinpoint-accurate detection of a stud’s center.

For edges, the tool probes for a high density. The SIGNAL STRENGTH INDICATOR gives the certainty of the target; three or two bars indicate a deeply nestled stud or one shrouded by a thicker layer.

Check The Latest Price on Amazon, Now!

Why should you use Zircon StudSensor i65?

1. Stud-Center Locator

Make one pass with the CenterVision technology in a single stroke. It allows you to find both edges in wood or metal studs to zero in the center.

It quickly and painlessly pinpoints the sides and center of wood or metal studs and joists behind walls, floors or ceilings. The audio indicator helps you get the job done faster while the re-calibration tool improves accuracy.

2. Scans Thick Walls for Studs

You can peer into thick walls with extra layers or extreme depth. The DEEP SCAN feature switched on will reveal studs buried up to 1 ½” deep. The DEEP SCAN mode gives extra power though it can lead to false positives due to the unit’s high-sensitivity when misused.

3. Wire Warning Detection

Zircon stands out with a unique WIRE WARNING DETECTION that continuously detects electrical wires as you scan for studs and objects.

It’s always ON in all modes to remind you of hidden and shielded AC wires beneath the walls. You can browse for electrical wires only in the AC Scan Mode and metal in Metal Mode such as screws, pipes or nails.

4. Auto-Correcting Technology/ACT

The ACT or Auto Correcting Technology checks calibration ten times per second during the first five seconds of the scan. It also recalibrates for the user when needed.

If scanning happens to begin over a stud, the tool corrects itself and points where the target lies.

5. Over-the-Stud Warning

The Over-the-Stud warning makes this Zircon stud-sensor a one-of-a-kind as it smartly detects when something goes wrong.

For instance, if you start at the edge of a stud and move the appliance away, it beeps continuously indicating a calibration error. A signal strength indicator helps you sift out the target from potential red herrings for clockwork accuracy.

  • Quickly and effortlessly locates the edgings and center of wood or metal studs or joists behind walls, floors or ceilings with Stud Scan mode up to ¾-inch
  • Patented CenterVision technology detects the center of a stud in a single stroke
  • Intelligent LCD projects directions, edges, and centers of studs
  • WireWarning discovers the existence of live AC Voltage up to 2-inch deep
  • ACT (Auto Correcting Technology) automatically rectifies human errors like scanning over a stud
  • Deep Scan, high-sensitivity screening probes to a depth of 1 1/2”
  • Revolutionary SpotLite Pointing system projects a beam of light to the center and audio indicators make it easier to visualize studs
  • It may not sense live AC wires if they lie more than 2-inch deep from the scanned surface
  • Detection depth and accuracy can vary due to moisture, wall texture, paint or type of materials

FAQ – Frequently Asked Questions

  1. Unit pops up all LCD segments simultaneously, and it beeps nonstop?

Try a flat surface or use the high-sensitivity mode for uneven seams.

  1. The area of voltage detection gets too large, how do I narrow down?

Switch the unit off and on again at the edging where the wire lies and scan.

  1. Does the center-finding technology render improved precision?

Yes, the SpotLite and CenterVision technology project the center with accuracy.

  1. Does it find screws in Metal Stud Mode?

Yes, you can reconfigure it to scan for metallic materials only.

  1. Does this work for the double drywall? I own another brand, and it doesn’t seem to work with our double dry walls?

Yes, the i65 works excellently on double deep drywall.

Final Verdict

With walls lurking with perils and mysteries, going it all hammer and tongs without pre-scanning puts you in jeopardy. Zircon StudSensor i65 Review relates to a center-finding locator to detect both the center and edges of all studs.

You can expose studs or joists in walls, ceilings, and floors in one pass. It comes in a perdurable high-impact case and proprietary SpotLite Pointing System, CenterVision and WireWarning to illuminate the center of a stud and indicate the presence of AC voltage.

You can mark the center of a stud for improved accuracy in measurements. The ACT or Auto Correcting Technology recalibrates for the user if you miss a stud with an arrow.

Product Reviews

No home improvement hobbyist nor any professional contractor ever wanted a below-quality tool. We all crave for the quality of great demands, high quality and cheap, isn’t it? I guess. The Bosch GMS120 Digital Multi-Scanner Review brings to one of the best stud finders with great quality.

Bosch GMS120 Digital Multi Scanner Review

The Bosch GMS120 digital multi-scanner is not a bulky product that would make you work irksome, but on the contrary, this product makes you love what you do. It has a customer friendly features that make it appealing and attractive.

Let’s consider its functions, having got yourself with some piece of junks called stud finders and you sincerely got not a bit of satisfaction from them? Now, it’s time to let go of them and consider the use of a 3mode scanner that would scan metal’ wood studs, and AC live-wiring perfectly.

Bosch GMS120 Digital Multi-Scanner Review | 5 Major Features

1. Multi Scanner

This product gives you the best of the services you’d ever look for in digital stud finding gadgets. It has three main inter-switchable moods for finding studs, metals and live wires. Its scanning doesn’t affect the copper pipes flood.

This product automatically calibrate as soon as it’s on i.e. if you are operating on low scanning parameter, and the parameter is not detecting the object, then it switches over by itself. Isn’t that awesome? Yes, it is. This perfectly helps you to encounter less stress.

2. Great Graphics Display

Apart from the large display of which mode you are using. You can also get a graphic depiction on the screen of your gadget. What do I mean?

You will see an atom like-ring structure at the front of your screen board, the big ring indicator flicks steadily with green light color when it hasn’t detected a target, while it turns red when it sees a metallic object, wood studs and unprotected AC wires.

It also indicates by making sounds which is a great feature for eye deficient hobbyist. It indicates the power strength of the gadget also. I guess is an amazing product if you would ask me.

3. Quality Deep Detection

Are you an electrician, a carpenter or a professional contractor; you seek for a handy work tool that can give you absolute comfort while using it? You obviously don’t have to worry much as the Bosh GMS120 digital multi-scanner is capable to make clasp of various sizes to be discovered with ease and fun.

It can be helpful as it’s expected to detect metals (non-ferrous) that’s 4.75inches deep, and 3.2inches deep for ferrous in cure concrete, 2inches for live wires and 1.5inches for wood studs. (Please note: If the thickness of your wallboard exceeds that’s of metal findings then it may not be so good for you).

4. Inimitable Center Finding

This product notifies users after one has hovered it around the same spot. It indicates by beeping and displaying of red color on the screen of your Bosh GMS120 gadget. It kind of makes a sonorous stabilizing sound when it’s at the point of focus.

5. Quality Battery with Nice Package

It has a dependable fitting battery that will definitely help you to greater productivity as to the fact that you don’t need to rally-round when you battery go drain when you already have a substitute. This product brings the best out of your work. It’s fast to respond to metals and other targeting materials.

Check The Latest Price on Amazon, Now!

Why should you use Bosch GMS120 Digital Multi-Scanner?

1. Low Vulnerability

Most hand tools are very susceptible to quick spoilage if they encounter concurrent usage. The Bosch GMS120 digital multi-scanner is one of the best when it comes to long usage; with no errors to look out for, you’re definitely on a safer side with its precision quality.

2. Handy                                                   

The manufacturer has carried out a tentative review of how versatile a world-competing-digital-stud-finders can be in shapes, sizes, color and so on. That’s why they’ve come out with this fascinating product in consideration of the health of its users to give the best.

3. Dependable Service from its Manufacturer

Having discussed the manufacturer in the preceded sub-heading to this (handy). Let’s discuss this in more salient manner. Perhaps you’ve bought this product just of recent, and you don’t get all the features, the manufacturers follow you up until you’re satisfied, even if it cost them replacing the gadget for you with another. It’s a WOW!! I guess.

4. Cheap

This product can cost you as low as $30 on Amazon. Are you serious? Of course, isn’t that cheap for a mere hobbyist to evaluate and contractor to opt for? So great in value that you never can tell with just ordinary product reviews.

5. Reliable

The Bosch GMS120 digital multi-scanner is reliable to the core. It’s best for first users as they can easily grab the prerequisites for making it a great use.

  • It’s portable.
  • Very easy to use
  • It’s appealing and reliable
  • It comes with package ( A 9volt battery)
  • It comes with guaranty
  • It last long
  • It’s cheap
  • It’s a 3mode digital multi-scanner
  • It finds center of studs so easily
  • It doesn’t work for plastered or lathed walls.
  • It doesn’t find the edges of studs
  • It doesn’t have distinguished notifying features for its three modes.

FAQ – Frequently Asked Questions

  1. Can one trust this product?

Answer: Yes, you can with its automatic calibration feature which switches to other notches so easily.

  1. I used this product, when it detects wood it’ll beep and when it detects metal it also beeps. How can I use this?

Answer: it takes various readings, the intensity it uses to detect metal is way far from wood. The metal takes a while before its detected. So, one can easily be intuitive to this differences as it switches.

  1. Can it be used on plastered walls?

Answer: This product is not great for detecting targets behind plastics.

  1. How can I get this?

Answer: You can get it by visiting the company’s website.

Final Verdict

This is the endpoint of the Bosch GMS120 multi-scanner review, in order to augment the reviews. It’s well believed that product that well suits one’s work and makes one’s work convenient is worth paying well for. This premise or axiom, whatsoever it may seem like, have become daunting because of the massive niggling reviews.

However, many users don’t even measure the thickness of the work feed before they are carried out their duties. It’s mandatory to put all these into consideration before using it. You can surely get great use out of it with its inimitable features.
Product Reviews

Being an expert requires lots of commitment, great use of tools and skillfulness in time management. What’s the best stud-finding tool that fits work for every wall?  Zircon metalliscanner is absolutely the best antidote to this poison that pinches the expertise of many contractors.

Zircon MetalliScanner M40 Review

The Zircon metalliscanner M40 reviews intend to give you adequate features that may intrigue you to opt for this amazing product.

Definitely, you can’t get less with all the Zircon metal scanner as it gives you confidence on taking contracts irrespective of the wallboard as this product can perfectly work effectively and flawlessly with its high penetrating power, awesome portability, highly coveted electronic features with a strong replaceable battery with 9volts.

Let’s consider this subject discreetly by considering the amazing features of this product.

Zircon MetalliScanner M40 Review | 5 Major Features

1. Great for Metals

Finding metals could be appalling and devastating to some extents but that is no longer an issue with Zircon MetalliScanner as it can easily detect metals both ferrous (metals that contain iron) and non-ferrous metals (metals that don’t contain iron).

The product is capable of detecting ferrous metals that is 2inch behind the wallboard and 4inches for non-ferrous metals behind the wallboard.

Are you obsessed with the possibility of this handy stud finder to work in plastered walls and lathed walls? Of course, you shouldn’t, as it does its job perfectly well.

In order to detect the presence of ferrous metals easily, all you have to do is by turning it on while it’s in your hand and it will detect, but this may not work for non-ferrous metal detection as you’d have to place it against the wall.

2. Perfect Scanning

This product is quite great for work tool as to the fact that you can use it for the various slot of work awarded – provided you are a contractor. These are what you can use it for: pinpointing, wide-scanning, and scanning through lathed and plastered walls.

Pinpoint scanning: This stud finder locates metals with small size. The ledge of this gadget does that, it has a pointed round shape at it sided part of its edge which is sensitive to small metals.

Wide scanning is used in locating wider metal positions as you can just tilt the gadget against the wall, then the light moves downward and upward flickering so fast at the one-sided part of its handle, then simultaneously giving sound (this is the indicator when metal is seen).

3. Well Packaged

The Zircon Metalliscanner M40 comes with an extra battery in its package for maximum use. This will help you as a hobbyist to use it effectively and save some money also. This gadget’s battery is well built with a possession of 9volts.

4. Nice Sounds

The blue coil on the gadget is so sensitive that it astutely sends the signal all over to the gadget and the handy gadget begin to beep.

In order to get an accurate reading, once the gadget beeps take the gadget off the spot, then re-position it in the same location, if it does beep it means the reading is accurate. It’s good for detecting nails and other metallic bodies.

5. Great Penetrating Power

Plastered and lathed wall is known to render most of the digital stud finder useless. That’s no more an issue as you can now use this to detect metals in wood, find studs in lathed and plastered wall, also finding rebar in concrete walls.

The major reason why professionals use this gadget is that it gives details on where stud starts, the center and where it ends. It has high penetrating poor with accurate readings.

Check The Latest Price on Amazon, Now!

Why Should You Use Zircon MetalliScanner M40?

1. Great Quality

You never can underestimate the importance of this product with its great unfailing features. It’s mostly used by experts because it lasts long and gives accurate inferences.

2. Cheap

The zircon metalliScanner product cost $30 on Amazon. It can be used by home development hobbyist as it gives them great solace when it comes to finding studs around the house corners.

3. Great for Contract Works

Every Artisan or carpentry work demands great diligence for neat work and awesome job, and finding this possible could be daunting especially when one is using a bad working tool. That’s why many persons have recommended this product for project work. Not for fancy sake but for a neat job.

4. Easy to Use

You sincerely don’t need to read the manuals before using it, when you can only start by switching it on (zircon products’ manuals are installed in DVD disk). Great and diligent use of this product prevents spoilage. It’s advisable to keep it in a cool and safe place.

5. Attractive

Mere looking at it from afar, the classy handy shape with its fascinating yellow/strip black color makes one speechless and seems eye-catchy. A local-catapult-like shape product, the blue coil crowns the two slant separated columns with a nice handy shape that will intrigue you to the optimum state.

  • Easy to use.
  • Very versatile
  • Highly recommended to professional contractors.
  • This product gives accurate result when used
  • A good metal finding
  • It indicates the start and the end of studs.
  • Portable to use.
  • It has high penetrating power and great for stud finding in plastered/lathed walls.
  • None

FAQ – Frequently Asked Questions

  1. What is in this product’s package?

Answer: A 9volt battery.

  1. How reliable is this product?

Answer: Nice!! Its sensitivity is amazing as to the fact that it detects small metals, its portability is incomparable with the fact that it fits toolbox and its penetrating power is really different and unique as this helps it in detecting metals.

  1. Can it work for lathed walls?

Answer: Absolutely, it does work very well.

  1. How can I get this?

Answer: Contact them through their websites.

  1. I tried using it for complex surfaces both it didn’t work?

Answer: In detecting magnetic metals (ferrous), use it for walls which thickness doesn’t exceed 2inches why 4inches for non-magnetic metals.

Final Verdict

This is the conclusion of the Zircon MetalliScanner M40 review, we intend to impugn everyone who is either a hobbyist or a professional contractor to use a product which is great in use, handy and high great detecting power, in order to give a neat and perfect job.

Not bulky and cheap with an Amazon review of 4.5 (positive). It’s one of the best product that one would ever use with this great amazing features. Mere talks are not enough but personal experience is the best. With its cheap price, you can just give a try and you’ll never regret it.

Product Reviews

How easy can one find studs on walls and with what gadget will make the work convenient and easier? This has been the rhetorical questions on the lips of many and CH Hanson 03040 magnetic stud finder review has come to proffer a solution to this question.

CH Hanson 03040 Magnetic Stud Finder Review

With CH Hanson 03040 magnetic stud finder you can perfectly locate the positions of studs around the wall of your house.

Having just gotten an apartment, you may want to watch out for studs around the wall of your house. Considering the best stud finder that will function well?

Definitely, CH Hanson 03040 Magnetic stud finder is good for you. It’s awesome for both formal uses and informal uses.

CH Hanson 03040 Magnetic Stud Finder Review | 5 Major Features

1. Strong Magnet

The CH Hanson 03040 magnets are made of powerful rare earth magnet. With its level, It can function effectively. This characteristic helps the product to be switchable towards different directions one places it, either horizontally or vertically. It attracts so vehemently that it becomes very difficult to drag across when it’s on the crown of nails or screw in a stud.

We have not discussed also the reliability this feature contributes as to the fact that it can perfectly be clingy to the wall.

That is, the magnet gets cleaved to the plastered wall each time a nail is found. There is no more room for finding marking of the position of metals difficult as there is space to do that in the gadget.

2. Adjustability

The product uses double adjustable magnets to locate nails and screw in studs. It has a colour: yellow and black colors to make it so attractive.

The product is made of soft gripping which helps a user to gently grab the product as one gently swing it around each part of the wall until the product’s magnet sticks to the wall. Its level can be adjusted in either the vertical direction or horizontal directions.

3. Portable and Compact

Do you need a pocket fixing stud finder for your maximum comfort while finding nails and screws, then CH Hanson 03040 magnet is a great option.

At times using the bulky machine to complete once work may not be excellent with respect to the stress it brings along, but handy machines are most fitting for excellent works and it also adds credibility to one’s work also. Surely, CH Hanson 03040 will definitely give you all of these.

4. Fixable to Tool Pouch

In other to make your work easy and discourage weariness, you can tie a dental floss to its loop and hold the other end of the dental floss as you gradually drag across the stud.

Move it in “S” motion direction when it hits a target, you’ll definitely know with the sudden change you’ll feel why pulling it.

This makes stud finding easy as to the fact that you don’t need to waste a lot of time by checking each side of the wall.

5. No Battery

This product is completely safe and durable as to the fact that you don’t need to bother yourself with the amount of power left on the battery at all is now settled with the CH Hanson 03040 magnetic stud finder.

Check The Latest Price on Amazon, Now!

Why should you use CH Hanson 03040 magnetic stud finder?

1. Cheap

Finding quality products is believed to be hard to find and getting one can really be costly. I guess that’s not true with CH Hanson 03040 magnetic stud as to the fact that it’s efficient, durable and cheap. Isn’t that great right? Indeed, it is.

2. Viable

Probably you are a stud finder savvy but your knowledge is still in the quest in search of great and efficient stud finder which will give you a perfect result and will fit your toolbox. You need not worry as the portability and other features of CH Hanson 03040 magnetic stud finder can be of fantastic use to you.

3. Great Ergonomic       

This product doesn’t require extra effort whenever the nail or screw is found in the stud. It gives you convenience as it solely clings to the wall while you carry out other necessary work on the wall.

4. Easy To Maintain

It can be put in your toolbox due to the fact that it doesn’t occupy space and coupled with the fact that it’s used by masons and carpenters for job adequacy.

5. Handy

The CH Hanson 03040 magnetic stud finder is so handy that it doesn’t consume much of your energy at all. The question is that “won’t the work be so difficult since it’s small and handy?”

Though it’s small and handy there is an aperture where you can tie strings too, which will be of tremendous help to you in reserving your energy. That’s awesome.

  • Soft for gripping by pinching with one’s index finger and one’s thumb.
  • It doesn’t require the use of the battery.
  • It’s highly reliable.
  • Very easy to use.
  • Strings can easily be tied to its loop.
  • The product is portable, pocket-fitting and awesome for the toolbox.
  • It uses powerful magnets to detect nails and screws.
  • This product doesn’t discover the edges of studs.

FAQ – Frequently Asked Questions

  1. Would this product be great for locating nails on wooden walls?

Answer: Of course! This product is very viable. It can detect metals as fringy it could be on any wallboard that is fastened with the studs.

  1. Does this product come with more than one package?

Answer: It comes with one package (the CH Hanson 03040 magnetic stud finder).

  1. Please, can this be used in my kitchen or is it made ordinarily for formal purposes?

Answer: It can be used for any kind of the room’s wall you desire. You can use it for your living room, kitchen, office and so on.

  1. Can I get your advice, please? I’ve bought this gadget for a while now, and I haven’t been able to use it effectively, I tried all the directive given but they weren’t working. What can I do to make my stud finder find nails?

Answer: If you’ve tried using it as directed on this platform then check whether you are not covering the magnet.

 Final Verdict

This is the main point of reference of the CH Hanson 03040 magnetic stud finder review, the product is acknowledged by thousands of users all around the world as one of the best stud finders earning its credibility on its portability, effectiveness and great power magnet functions.

You gently grip it and make a mowing or swing movement around the wall and once metals are discovered, you will definitely know with a swift displacement of the gadget from your hand to clinging to the nail.

It’s highly recommended for Artisans such as carpenters and other vocational occupations. It’s awesome and reliable.

Product Reviews

Finding studs in a well lathed and plastered walls could be appalling and horrifying with the thickness of laths and plasters? The thickness of a modern wall is ½” to ¾”, which is incomparable to olden walls which thickness is thicker.

Most Stud finders have a limit to the level of how they can detect, that’s why the Studpop Magnetic Stud Finder Review is set to disseminating information that may be helpful for your work.

The Studpop Magnetic Stud Finder

Every home needs a comfortable and well decorative wall, and using plastered wall is quite a great option. However, in order to hang or mount your electronic gadgets, shelves and other home improvement equipment, you will definitely need to find studs on your wall.

The question is what stud finder’s tool will be best for you at a cheap rate and will also be viable? It’s the Studpop magnet stud finder.

The Studpop magnet stud finder is tiny stud finder that magnetizes each position that nails, screw or any metal that’s attached to the wall can be found. It makes a pop sound when it witnesses the object around the magnetic field.

Studpop Magnetic Stud Finder Review | 5 Major Features

1. Tiny in size

Home development is a ‘must’ luxury that one has to invest in immensely. Why? Because home is the best venue to carry out day-to-day indoor activities in form of rest which can improve the health of all individuals. Because it’s paramount, the manufacturer has made effort to make it affordable and handy for everyone and fitting for every toolbox.

It can be possessed by individuals to locate nails/screws in the stud on the plastered wall. Its dimension is 8 x 6 x 2 inches, and this can help in limiting the weariness that weighty gadget may cause. .Magnet as Its Great Sensor

Think about non calibrated stud finding gadgets, then you’ll surely opt for Studpop magnetic stud finder. I guess you keen to ask how a no digital gadget can be used to detect metals/screw that is well penetrated; it’simples: its magnet is very powerful to detect metalsthat’s deep, it’s a product that is known to be one of the best stud finder for locating nails and screw in a thicker plastered walls.

2. No Batteries, No Calibrator

Have you tried a lot of stud finders and it has become a torn to your flesh in believing stud finders? You don’t need to worry anymore with a swift shift to the use of Studpop Magnetic stud finders as it helps you to carry out your work flawlessly and effectively.

With this product you don’t need to bother about the possibility of your stud finder gadget will be tripping off. In fact, you don’t need to regulate its effective functions because of calibrator absense. It works perfectly like other great stud finding the gadget you can imagine.

3. Beeps with Pop Sound

This product is reasonable as to the fact that it can also be used by health deficient folks. It makes a pop sound whenever it comes across the crown of every nail.

Serious? Oh yes! It’s so fascinating that with this feature you don’t need to solely depend on one means of notification while you can now enjoy two so that if you miss the beeps, you can’t miss the cleave. It’s enjoyable while using it.

4. Good for Sheetrock, lath and plaster walls

Definitely, mounting heavy materials on your lathed or plastered walls could cause an impromptu pulling down of your electronic gadget which may damage your electronic properties.

So, in order to prevent this mishap, you’d want to find nails in the studs (to locate hard places that can carry weighty materials) on your plastered wall in order to mark nails (it results to low-cost charges by carpenters and other Artesian).

No more regret for sheet rocks and lathed/plastered walls when you can comfortably use the Stud magnet stud finder is very well viable.

Check The Latest Price on Amazon, Now!

 Why should you use the stud pop magnetic stud finder?

1. Easy To Use

All stress is now a tale of the past with the use of the Stud magnet. You can conveniently handle it with your thumb and the index of your finger. You sincerely don’t have to be expecting when the gadget becomes clingy, the product also makes the sound. Isn’t that great for presents to your loved ones who desire one?

2. Portable                               

The product is a pocket fitting product that can excite toolbox, coupled with the fact that you can buy as many as possible and all won’t cause the nuisance to your toolbox all make this a preferable option.

3. Reliable

At times, stud finder gismos are very hard to trust, reason because the rate of effectiveness in locating deep metals is limited. Some gadgets are good in locating metals of 1/2” thickness while some can detect both the screw/nails’ crown in the wall plastered thickness of ¾” and the former.

4. Customer Reviews

The customer review is undoubtedly one of the propellants that give confidence to potential customers in structuring their minds to choosing best-recognized products. This product is very well recommended by its customers, earning 75% positive reviews of 5points. A total of 4.5 positive reviews on Amazon.

5. Cheap

New contrast devices can be reviled but with a little cost of this product, you can just give it a try and see how viable and helpful it’s going to be. I believe $10 is very cheap for such an amazing home development gadget.

  • It’s easy to use.
  • It’s very dependable
  • The product is cheap
  • It has a good magnetic feature
  • The product is a pocket fitting stud finder.
  • Durable: It doesn’t break easily when fallen.
  • No room for battery or calibrators.
  • A handy gadget for convenient uses.
  • No mistakes in clinging to nails/screws.
  • The product uses two mediums for its notification.
  • It doesn’t have the aperture to tie it to strings.
  • It doesn’t detect the edges of studs.

FAQ – Frequently Asked Questions

  1. Can this be used for rafted ceilings?

Answer: Of course! It functions so well in this also. All you just have to watch out for is to prevent any material from covering the magnet.

  1. Is this product only awesome for a plastered wall?

Answer: This product is multidimensional, you can use it for any kind of wall covering including sheetrock.

  1. What’s the limit of thickness that this tool can detect its penetrated nails?

Answer: Around the highest range of ¾ “ and 1” thickness.

  1. Does this product respond to detecting wires, to prevent drilling the conduit?

Answer: It doesn’t detect wires at all.

  1. What comes with its package?

Answer: It comes alone.

  1. How would you know if the nail is at the middle of the stud and not at the off-centre of the stud?

Answer: Very easy. Its work like a normal magnet attracting irons in its magnetic field, it’s just that it’s made in a more efficient way.

Final Verdict

The bottom line of the Studpop Magnetic Stud Finder Review is that no product is hundred percent efficient but you can find a product that can sufficiently give you more than you desire in terms of its response to work feed and other necessary features.

Finding a quality product that can help you in detecting metals that are well hammered to your lathed wall then the stud pop magnet stud finder is good for you. It’s cheap and delivers no flaws in its notification. No calibrator to regulate its efficiency; you can use it randomly for better work delivery. It’s very well recommendable.
Product Reviews

Are you a carpenter or a technician who is keen to improve your proficiency in home development? Though you are a savvy in stud finders yet you’ve not heard about the Franklin sensor pro-sensor 710 precision stud finder, a magnificent digital stud detector that can make your easy and convenient.

The Franklin Sensors Pro-sensor 710 Precision Stud Finder Review

Being old, it’s well understood that this comes with notable plights which may warrant a big “NO!” attitude toward the use of sliding stud finders to carry out home developing works. However, all plights are now succumbed and made easy with the use of the Franklin sensor pro-sensor 710 precision stud Finder.

All that one has to do is placing it well towards the wallboard where one desires to find studs, in no time it displays the points. Is having your result in a jiffy not better than spending tons of hour in sliding through each side of the wallboard? Of course, it’s encouraging and makes one’s work easier and convenient.

The Franklin Sensors Pro-sensor 710 Precision Stud Finder Review will certainly be of a tremendous help to you as it reveals the fascinating features of this amazing product.

The Franklin Sensors Pro-sensor 710 Precision Stud Finder Review | 5 Major Features

1. Great Sensors

You sincerely don’t need to slide to and fro around the wallboard. The sensors are very sensitive that it can penetrate through thick surfaces. It shows edges of studs. In order to mark where the metal is found, all you have to do is to mark the center of the three-pointed LED light display that’s projecting on the stud finder.

2. Display its Light Accurately

This product doesn’t make the “beep” sound, all it does is to quietly display three LED light at the direction the metal/nail is found. It has thirteen LED light at the front of the product closer to its ledge, but the light only glows when metal is discovered.

The displayed lights are visible, not only that but coupled with the fact the product also possess high ionization energy that can penetrate through thick walls but with short wavelength to travel far.

It can be trusted with its penetrating power. Care must be taken while using this stud finder as it’s very capable to sense apertures in pipe vents where other metals pass-through behind the wallboard, as it can also indicate same position as a stud position on the surface of you’re the gadget.

3. Simultaneous Result Display

Do you find it hard to mow your hand through wallboard? Make work easy as you get all the result needed, provided more than one stud is situated at the same field the product is pointing at. Its LED light displays so easily as to show you the edges of the stud which is rare in other stud finders, especially the magnetizing stud finders.

4. High Quality

This product is awesome as it can perfectly measure the size, density and toughness of the detected metal before providing its inference. You can use this project to mark out the width of the stud, which can perfectly help you to evaluate the best position to carry out your work.

5. Long-Lasting Battery

It uses a 2AA battery and it’s not packaged with any other battery. Its battery is a 3 volt battery capable to run an estimated period of at least 50 minutes when fully charged.

I guess you would want to find out how you can get a good battery replacement right? Very well then, all you must do is to get connected to the manufacturing company either through their website or agents as they give you a better information to get an alternative.

Check The Latest Price on Amazon, Now!

Why Should You Use Franklin Sensors Pro-sensor 710 Precision Stud Finder?

1. Highly Dependable

Looking for digital electronic stud finder for maximum work efficient, you can’t get it wrong with the Franklin Sensors pro-sensor 710 precisions as it works effectively with a long-lasting battery.

2. Strong

Do you have a plastered wall with the thickness of about 3/4” which will really cost a quality stud finder to detect it accurately? You don’t need to bother what gadget proffers the best solutions with the help of the Franklin sensor pro-sensor 710 precision stud finder. Its LED light is a highly calculated penetrating light that detects the positions of studs.

3. Great Sensor

The sensors don’t take time to show positions that stud can be found. It has good LED display abilities, showing the edges and the centers of studs at with a standard measure.

4. Nice Reviews

This product has a review of three thousand and one reviews with 4.5point in total, which shows the relevance and the impeccable functions of the gadget in developing homes and around the world.

5. Fair Price

This product cost $103 on Amazon, which I think is fair and awesome. Consider the immeasurable benefit that one will get from it and its versatility that makes work convenient and intriguing.

  • It’s versatile
  • It disperses the LED light absolutely well and accurate
  • It has great ionization energy
  • It can be used for a long period of time.
  • It scans flawlessly and fast
  • Its weight is awesome with respect to its functions
  • It’s not bulky neither is it a pocket fitting gadget.
  • It doesn’t signify what material that is found whether it’s metal, stud or AC wire.

FAQ – Frequently Asked Questions

  1. Does this product locate wood beside wood?

Answer: No, it doesn’t. But you will definitely like its scanning ability.

  1. Can this work for sheetrock walls and my bathroom tiles?

Answer: Yes, it will. It’s dependable when it comes to penetrating through hard surfaces.

  1. Will this work perfectly well for detecting metals?

Answer: No, metal’s atoms is held firmly by electrovalent means which means its crystal structure is tightly joined and create no space, unlike carbon-hydrogen materials that their bonding still give spaces.

  1. But some tried it on some kind of ceramic materials, it worked while some it didn’t. Please, can you explain?

Answer: It all boils down to the nature of your work feed’s thickness. It’ll be difficult for the ionization energy to penetrate materials that their thickness exceeds 1”.

Final Verdict

The Franklin Sensors Pro-sensor 710 Precision Stud Finder Review intends to explicitly redefine the significance of improving and developing homes all around the world with an amazing product such as the Franklin Sensors Pro-sensor 710 Precision Stud finder.

To limits world discouraging factors such as stress, tiredness and the nature of the used home development products, the Franklin Sensor Pro-sensor 710 stud finder manufacturer has invented this fascinating product to make work easier, faster and encouraging. It’s highly recommended by millions of persons all around the globe.
Product Reviews

Do you seek for a stud finder that has the inter-switched features that can do almost everything pertaining to home improvement, and will also function well? Of course, Zircon Multiscan i520 is the best gadget to opt for. The Zircon Multi-scan i520 centre finding review brings to you one of the best stud finders that will help you to save your expenses and have a long-lasting use also.

Zircon Multi-Scan i520 Center Finding Stud Finder Review

The Zircon multi-scan i503 center gives pleasure and luxuries that one craves for with its 4-mode inter-switchable features that will help you to know what kind of material is behind your lathed walls. It can detect metals, uncovered AC wires, stud and woods. It scans so deeply even more than some stud finding products.

The features will explain the product’s qualities that make it the best fit for your work. You never can tell how amazing the features are not until you read through, then you’ll know that it’s made primarily for you.

Zircon Multi-Scan i520 Center Finding Stud Finder Review | 5 Major Features

1. Scan

There are four modes of scanning, and they are Stud, Deep, Metal and AC scan. We’ll be discussing the functions of this material.

i. Stud scan – This product is as portable as your handset. It projects an ultraviolet ray on the wallboard and scans through. It penetrates even to a ¾” thick wallboard. It locates the edges and the center of studs when found.

ii. Deep scan – Zircon multi-scan i520 center finding scans as deep as 19mm. However, it’s normal for this product to give inadequate readings which may be discouraging. Please note that when this stud finder begins to malfunction while scanning for stud, this means the stud is a bit deeper than 0.75” then slide the mode selector to a deep mode for better scanning of 1.5”.

iii. Metal scan – One of the fascinating things about this stud finder is that it can perfectly detect iron consisting metal and other pure metals that don’t consist iron.

iv. AC scan – Having complicated issues with finding electrical conduit or unshielded wires.  You sincerely don’t need to use stud finder gadgets, just use zircon to locate the position of the uncovered AC wire.

2. Ultra-bright LED Display

The screen of the zircon multi-scan i502 stud finder is perfect with the ultra-bright feature as it can be used by eye deficient persons.

With bold word tagged on the screen of the gadget showing also the route the material takes, you can completely trust this product for your day-to-day home development business. You can see what mode you are using at the moment of use.

3. Auto-Calibrating Tool

Though it’s used primarily for the interior part of the home. This doesn’t limit this product, it has the good automatic correcting technology to help one in the direction to take in order to get the proxy result.

Having variable penetrating power in its scanning modes such as stud scanning with 19mm, deep scan 38mm, metal scan with 76mm and AC scan with 51mm all make this product a brilliant product.

If it’s not giving the proper result you can easily switch over to another scanning mode (using metal scanning is preferable to others while finding studs behind plastic).

4. Replaceable 9volt Battery

The battery works like any other battery. It can be replaced by new Duracell 2017 which is a bit advisable in order to give absolute confidence at work. The battery drains down even when not used.

The zircon multi-scan i520 center finding gives a signal for battery replacement if in case the battery runs out of power. It’s very great with its battery maintenance as its multi-function doesn’t affect the quick drain of the battery’s power.

5. Reliable Product

The zircon multi-scan i502 stud finder gives warning indicator with its sound when a wire is found during scanning. It works so perfect and can fit into your toolbox without occupying too much space. It’s manufactured by high tech Engineers for better usage.

Check The Latest Price on Amazon, Now!

Why Should You Use Zircon Multi-scan i520 Center Finding Stud Finder?

1. Multi-scan                                                        

Isn’t it awesome to rest one’s elbow on a broader body? Of course, think about the confidence it gives with undisputed benefits such as privileges to save some extra fee for other necessary things.

Why would one go for products that have a single feature with a higher price than procuring a multidimensional product that can do quadruple functions earning same product’s security with other single-purpose products?

2. Affordable

Very cheap that it can be affordable with $49 only, isn’t that great? Of course, it is. You can get the best of service as illustrated on this review. You don’t have to launch out for others when you have a cheap digital stud finder at the very tip of your finger.

3. Handy

You can always trust the portability of the product as it doesn’t stress you out. It gives you quick result when finding studs and other materials behind your lathed walls.

4. Quality Digital Feature

Get the best out of stud finders by opting for a strong and dependable product such as zircon multi-scan i520 stud finder that gets you all the required features.

  • Zircon multi-scan has four reliable scan mode with variable penetrating power
  • It possesses an Automatic Control Technology (ACT)
  • Zircon multi-scan has a great ultra-bright LED light.
  • A replaceable 9volt battery
  • Very easy to use.
  • Absolutely dependable.
  • Used only for interior purposes only.
  • It gives a wrong reading when using it on plastic (switching over to metal scanning solves this).

FAQ – Frequently Asked Questions

  1. What kind of battery best fit for it and best replacement alternative?

Answer: Use Duracell newest model as an alternative. It uses 9volt battery

  1. Please, how will I know if it scanning the center of studs?

Answer: The spotlight indicate by flickering and it starts to beep.

  1. What other package comes with this product?

Answer: None, it comes alone.

  1. How effectively does this product work on plastered and lathed wallboard?

Answer: If you will be using it on plastic then use metal scanning because it has the highest penetrating power.

  1. Can one fully trust it for wire tracer?

Answer: No, but to some extent, you can use it.

Final Verdict

The significance of zircon multi-scan i520 center finding stud finder review is to bring to you the best stud finder that can give you accurate result while working and making your work easier and convenient.

Undoubtedly, Zircon multi-scan i520 center finding gives you all these features unfailingly with the convenient holding of the tool.

Very cheap to buy and it also has positive market reviews as to the fact that you can live up to your expectations. It lasts longer when you have batteries to replace the follow-come battery. It’s highly recommendable for professional contractor and home developing hobbyist (it adds credibility to one’s career).